Polaris Discussions about Polaris ATVs.

i had a lil accident

Thread Tools
 
Search this Thread
 
  #11  
Old 01-07-2004 | 12:46 AM
BigBadScrambler's Avatar
Elite Pro Rider
Joined: Jul 2002
Posts: 6,270
Likes: 0
Default i had a lil accident

Are you looking for Trailblazer platic on Ebay? Cuz it is the same as the scrambler and sport plastic. Just some FYI
 
  #12  
Old 01-07-2004 | 06:18 PM
mudmaster250's Avatar
Thread Starter
|
Pro Rider
Joined: Sep 2003
Posts: 1,183
Likes: 0
Default i had a lil accident

ya, ive been lookin at both but theres not much on there. i figure that i can get either one and if its scrammy plastin i can just take of the stickers and get a graphics kit. thanks
 
  #13  
Old 01-07-2004 | 07:25 PM
Breezer's Avatar
Range Rover
Joined: Jan 2003
Posts: 162
Likes: 0
Default i had a lil accident

My brother had a Banshee that I tore up pretty good a couple years back. I took it to a company near my house that specialized in plastics. Long story short, they were able to "weld" it back together. Matched the color too! Hope this helps.
 
  #14  
Old 01-08-2004 | 04:36 PM
ajo771's Avatar
Pro Rider
Joined: Jun 2000
Posts: 257
Likes: 0
Default i had a lil accident

there is a process called extrude welding which is a form of plastic fusion. I became familar with it on a job site and used it to repair my fenders. It will look sloppy until you get familar with the process but once you got it it make a stong repair. Stronger than the original plastic in fact.

Lee supply in PA rent the equipment and sells the welding rods, but they are designed for large commercial applications and would be costly. You can heat metal plates and melt the plastic back together, But start on the backside first.

Good luck.
 
  #15  
Old 01-08-2004 | 07:09 PM
eiger2's Avatar
Pro Rider
Joined: Dec 2003
Posts: 1,021
Likes: 0
Default i had a lil accident

Harbor Freight tools has a plastic welding kit for $30. It's mailorder. I haven't tried it yet. Try www.harborfreight.com and enter part no. 41592-1vga. They also have a powder coating kit for$100, you need an old oven, don't use your mom's. Eiger2, out.
 
  #16  
Old 01-08-2004 | 09:23 PM
huskerjim's Avatar
Pro Rider
Joined: Oct 2003
Posts: 614
Likes: 0
Default i had a lil accident

personally, your quad isn't worth plastic, run it with no plastic it will be easier to clean that way as well and faster and look cool too.
 
  #17  
Old 01-09-2004 | 12:47 AM
mudmaster250's Avatar
Thread Starter
|
Pro Rider
Joined: Sep 2003
Posts: 1,183
Likes: 0
Default i had a lil accident

whats that sposed to mean? thats just what i wanna do, run it with out plastic so i can get covered with mud and what not and eat rocks from my tires. come out to my place any day and my "worthless" tb will drag that thing u ride through any mud hole u point it at. thanks for all the real help everyone else gave me. can u give me some ore info on that plastic welder? thanks, scott
 
  #18  
Old 01-09-2004 | 12:53 AM
csamayfield55's Avatar
Pro Rider
Joined: May 2003
Posts: 404
Likes: 0
Default i had a lil accident

don't blame him, everyone knows you have to have something wrong to ride a hondu!!!
 
  #19  
Old 01-09-2004 | 01:01 AM
mudmaster250's Avatar
Thread Starter
|
Pro Rider
Joined: Sep 2003
Posts: 1,183
Likes: 0
Default i had a lil accident

LMAO that was great
 
  #20  
Old 01-09-2004 | 02:08 PM
huskerjim's Avatar
Pro Rider
Joined: Oct 2003
Posts: 614
Likes: 0
Default i had a lil accident

any company that uses left over struts to put there quad on the market thank you but no thanks....they will be out of biz in less than 5 years. don't waste your money on plastic buy a real quad
 


Quick Reply: i had a lil accident



All times are GMT -5. The time now is 05:00 AM.