trailblazer carb
#1
#5
trailblazer carb
I used to have one on mine. The intakes are very close. If you take some dishsoap it will slide right on. You do have to jet it down. If you dont have any other mods then you will notice much of a gain. You need a pipe to let it breath then a bigger carb would be good. I know it is hard to convince younger peoples parents to get a pipe for tiier quad but it is the pipe that makes the biggest performance gain. second is the porting. Everything else is just a plus. 1 hp here, 1 hp there adds up. you can usually go on e-bay and get them for around 40-50 bucks. Just look under Polaris Scrambler. I see them there all the time. That is where I sold mine. I now have a 36 mm pwk flatside. This carb is awsome but the 34mm did have a good gain.
#7
Trending Topics
#8
trailblazer carb
i also have a 34mm on my tb i chucked it in my laythe and took some off the snout and the other problem is the I.D is bigger than the 30 so the rubber boot is smaller if you stick the 34 on and look into the carb from the back side where the air enters you will see a 1/6 to 1/8 inch difference meaning the rubber boot being to small and making a sharp lip all the way around the carb causing a disterbence i put mine the the laythe and cleaned it all up for a smooth transaction.