I just sold my mini bike and got the money needed for the RCR kit, but while lookin at HPD's site i found that their $210 porting gives me hp in the low 30's. Is this better or worse then the RCR kit. I dont plan on doing ne more mods to the engine. Is the porting going to give me the low end power gains of the rcr with the better reponse and higher top end? Thanks again

 

You are still going to have to do clutch mods to match the new powerband. So my vote is the RCR kit and send your cylinder to bubba to have him port it

 

sweet thats what i wanted to hear. I just like and trust rick better then an internet site. Thanks again and whats the cost of a bubba port job?

 

You would have to PM budda that question, or TBSleeper may know. He had Bubba port his cylinder

 

Actually Rick and HPD work together on gear....you can trust them both. [img]i/expressions/face-icon-small-smile.gif[/img]

 

Oohhhhh, and you can't trust me?[img]i/expressions/face-icon-small-wink.gif[/img] Trailblazinrider, you would have to personally e-mail me at ramseydb@***-internet.com I am not allowed even in PM's to discuss anything that would be construed as business. I would always go with the pipe kit such as the RCR first, then if that's not enough for you then go with the porting and shave the head a little to keep good bottom end. How much power you want just depends on how much you want to spend.

 

once u get enough money after the rcr stage 1 kit go with the porting from bubba. bubbas porting was well worth the money trust me

 

Doh! Bubba be good too?! At least that's what he told me. [img]i/expressions/face-icon-small-smile.gif[/img] Er, um, I mean I saw that, on a friend's, brother's, cousin's machine. [img]i/expressions/face-icon-small-smile.gif[/img] J/K

 

[img]i/expressions/face-icon-small-happy.gif[/img] Zoom Zoom!

 

Hey, sorry if i offened neone. THnaks for the info and hopefuly soon i will get around to ording the rcr kit, then get a job if i want the portin. Once again, thanks for the help!