I have an 03 Trail Boss 330 but there dont seem to be any grease zerks on the struts or on the A arms.
Is this usual or a mistake ? [img]i/expressions/face-icon-small-confused.gif[/img]

Any thoughts appreciated.

Great forum by the way.

 

Scorps,

None on the A arms. You can always spray some Tri-Flo onder the rubber boots. Pull the boot gently away enough to get the spray can nozzle straw under it and give them a couple shots.

Look close at the very bottom of the struts. You should see a zerk for each one.

Lukester

 

Thanks Lukester I'll have a look.
The maintenance manual shows where they should be but I didn't see them.

 

If you don't have a flexible hose for the grease gun, you'll need to get one. The swing arm zerks are a pain to reach.

 

I found the ones on the struts. They are on the inside (not where the manual said) but definitely none on the A arms. Guess i'll drill them and fit some when I do a stripdown.