Well I have my HPD exhaust and I have my HPD clutch kit coming in in a week or two....I really don't want to take it some where to get it put in...It will cost me some gold to get it done....Is it pretty easy to put in a clutch kit yourself?? Do you need any special tools to put them in???? Send me info...I do most of my own work on my quad and If I can do this then I am...

 

you don't need any special tools, just follow the directions they give you and take your time.

 

It is very simple, get out your service manual and the kit's instructions and take your TIME... If you need any help when you start installing it, well thats what were here for[img]i/expressions/face-icon-small-wink.gif[/img]

Good Luck,
TrailRider

 

Ha,,,thanks trailrider and 4464...Thats what I needed to know...so yup I should be working on it in about a week or so...and if I do need help then I'll holler!!! thanks guy!

 

Anytime[img]i/expressions/face-icon-small-smile.gif[/img]

 

You will need a good pair of snap ring pliers and a second set of hands would help when it comes to the secondary clutch

 

make sure you have a pair of snap ring plyers!!!! It is a must. They are cheap and will save you hours!


Russ

 

i am going to put one in soon with all the performance mods i have i am not getting all the power from them and who makes the best hpd or any other company like hotseat or aaen

 

Yea it's easy, I just put one in last weekend. It helps alot. like the others said have a set of sockets, torque wrench, snap ring pliers, and a friend. You will need a friend to help you compress the spring while you tighten bolts. Good luck!