what kind of gas do you use?
#3
what kind of gas do you use?
The 500 HO motor takes 87 Non-oxygenated or 89 oxygenated. I just run 89 octane (midgrade) But you should be fine with 87 regular. The Pred takes 91 or higher cuz it is a higher performance motor. The other polaris motors dont need that high of an octane. If you were to run 110 octane on a stock sportsman motor you will do more harm than good
#7
Trending Topics
#8
what kind of gas do you use?
If you are running too high of an octane on an engine that it not designed to for it, you can cause pre-ignition. Pre-ignition has the same effect as advancing the timing. Icauses the engine to be subjected to huge amounts of heat, because the piston and cylinder walls are subjected to the burning process for a longer period of time (higher octane burns slower), this in turn raises the combustion chamber pressure. It's possible for pre-ignition to melt the top of pistons because of the extreme temperatures that this advanced timing causes. Keep in mind that any time you raise the temperature in the cylinder you get a corresponding rise in pressure. So thats why it is important to run the motor on the recommended octane level