Does anyone know the exact specs for a 1999 Sport 400 rear wheel bolt pattern?I think that it is 4X100 or 4X101 or 4 1/2 inches between the bolts, but need to know the exact specs.

 

I am pretty sure it is 4/4". I will go check for you, Yes it is for the rear of the ATV. I looked in Dennis Kirk. BUt that Mgazine is pretty screwed up. I hope this helps you

 

I think thats right...

 

I've seen the 4/4 pattern listed in the books, but I need to know the size in millimeters or inches.I think that it is around 4X100 or 4 1/2 inches, but need to be certain.

Thank's for the replies

 

I have no experience w/ this but read it somewhere once and printed it for future use. I have yet to venture into buying new hubs/wheels.

Hope this helps..............

""Polaris has a 23 spline axle w/ a 4x101 rear wheel pattern. You can get dura-blue hubs w/ a 23 spline and "Honda" 4x110 wheel pattern. There are lots more choices for aftermarket rims w/ this pattern. The fronts are a 4x156, the same spec as banshee.""

EC

 

The Scrambler rear is a 4/4 inch. Conversion to mm is 25.4.

TheJoka
400 Scram