The topic explains it[img]i/expressions/face-icon-small-wink.gif[/img] Where do I mount the Trail Tech? ...also, which one do i order, is it the one for Polaris 4x4s?....[img]i/expressions/face-icon-small-smile.gif[/img]

 

Yep, the one for the Polaris 4x4's. Check my pics for where I mounted mine. Its mounted to the headlight bracket for easy visability

 

thanks BBS. It looks like i can just play around with it and see where i like it best. How long did it take to hook up, does it come with easy instuctions?

 

the one hard part is drilling a whole for the magnet thing to go in. and u gotta remove a bolt and replace it so not to hard.

 

what will i need to drill a hole in?...i am asking too many questions..[img]i/expressions/face-icon-small-smile.gif[/img]

 

u have to remove one of the brake rotor bolts and replace it with a magnet and u have to drill a whole in the ummm ummmm....

 

You drill a hole in the strut housing to mount the sensor. Very easy. For the 4wd models, you attach a magnet to the brake rotor. JB Weld works good for that. Then just run the wiring. Should take less than 1/2 hour. The hardest time I had was getting the magnet and sensor aligned properly. Overall it was a very easy install. Do you have the stock size tires on the front? If so, I have the number that needs to be programed into the Trailtech for the tires. NCScrambler gave it to me and had it GPS verified

 

thanks for all of the help everyone BBS, i sent you a PM...