if i go to a 38 mill carb where can i get a boot to fit my 400?

 

hmmm no one has ever put a bigger carb on there bike? if i go with a 38,39 mill carb where can i get rubber boot from?

 

The stock boot will work it is just a tight fit.

 

thanx my stock boot is tight now i thought you would have to replace it

okay now if i go with the 39mil what needle ,slide and pilot, and main jet should i go with? on my stock carb i run a 220 main and everything else is stock on the carb but i might bore the stock one out in the mean time

 

Well if you don't have the 39 PWK yet i would highly suggest that you get it from either Rick Ritter or HPD,they set them up different.When i had the 39 i was running a 35 pilot,EEG needle and around a 178 main.This was with a race mod but this should still get you in the ballpark.

 

THANX i have a buddy that has some that he said he would get rid of 1 for me as for the hpd race i am going to get a trail port and the flywheel done here pretty quick i just need some where to start with the carb

 

okay i got my 39pwk what slide should be in it ? the one in there now is a #6 and the needle is r1368 g? they had a 160main but i will pick up some bigger ones