NB,

That is interesting I want to try it on mine. But wouldn't it off-set if you hit some
bumps or something?

FYI, for those wanting a step by step install on the wire/diode 3-Way Headlight Mod.product installed (Quadovator)
check out my BIO pics under my icon/Supporting Member split windown pane (left).

R'

 

<div class="FTQUOTE"><begin quote>Originally posted by: RticKwad

NB,



That is interesting I want to try it on mine. But wouldn't it off-set if you hit some

bumps or something?



FYI, for those wanting a step by step install on the wire/diode 3-Way Headlight Mod.product installed (Quadovator)

check out my BIO pics under my icon/Supporting Member split windown pane (left).



R'</end quote></div>




If u asking me. I'm not sure what u mean but only 2 wires come into low beam lights and just gotta find which one carries power and run jumper wire,smaller wire the better cause it won't carry more power then it needs. but run to high beams incoming power wire and thats it. like i said u only have all 3 lights then no matter where headlight switch is cause u run power down to lows when u put switch on high beam and vice versa. but I've had no problems and i run a million candlepower spotlight with them. i've done same on all my quads over years without any issues

 

Dosceola,

Not sure really what you mean? Were addressing
another poster? I was addressing NB for his little
hack on positioning the switch between low and high
to get all three to light. I have never heard of doing that
and yet to try it too.

As for your post, I believe all of it, no questions asked here.
I cheated! I bought the Quadavator product and crimped the
two wires together following the instructions. Yes I did this
on my old 450 it worked well! I just traded in and have a 800
now. I am curious if NB's hack works, will let ya know the next
time I pull out my 800 (Tomorrow, lol)

R'

 

<div class="FTQUOTE"><begin quote>Originally posted by: RticKwad

Dosceola,



Not sure really what you mean? Were addressing

another poster? I was addressing NB for his little

hack on positioning the switch between low and high

to get all three to light. I have never heard of doing that

and yet to try it too.



As for your post, I believe all of it, no questions asked here.

I cheated! I bought the Quadavator product and crimped the

two wires together following the instructions. Yes I did this

on my old 450 it worked well! I just traded in and have a 800

now. I am curious if NB's hack works, will let ya know the next

time I pull out my 800 (Tomorrow, lol)



R'</end quote></div>

Sorry thought u asked me about my setup. hope all works out for ya. have fun.

 

No problem D, you have FUN too!

R'