trailblazer trail mod flywheel
#1
trailblazer trail mod flywheel
well i pretty much already have a trail mod but if theres anything u guys think i should get tell me, but to my question now, do u think race lightening my flywheel would be a good idea. my starter dosnt work have the time anyway so its not a big loss and i understand that it dosnt pull hard at all. it pulls super easy. what are the pros and cons(if there are any conss) of lightening the flywheel. and do u think that rick would mill one then send it to me and then i could send mine so i didnt have any down time? thanks, scott
#2
trailblazer trail mod flywheel
I just did mine yesterday and rode it for the first time today and I love it. It revs real fast. I can ride long wheelies on it now. Can't wait to get it on the trails! The race lightening is well worth loosing the starter. It fired up first pull too. [img]i/expressions/face-icon-small-wink.gif[/img]
#3
trailblazer trail mod flywheel
the only complaint i see is if yours riding slowly or in tight situations
the lightening flywheel can be embarrassing,it mean you need to rev engine higher in r's to get as much torque at lower rpm normally
using.BUT if it become a serious changes wich you don't like then,you can always compensate by a good dialed-in clutch kit at yours need.
so it realy worth when everuthing is done as above as below.
the lightening flywheel can be embarrassing,it mean you need to rev engine higher in r's to get as much torque at lower rpm normally
using.BUT if it become a serious changes wich you don't like then,you can always compensate by a good dialed-in clutch kit at yours need.
so it realy worth when everuthing is done as above as below.
Thread
Thread Starter
Forum
Replies
Last Post
Hankey Pankey
Performance Mods and Project Quads
3
05-01-2018 01:33 PM
Hankey Pankey
Performance Mods and Project Quads
0
08-17-2015 05:01 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)