I have a 97 400L Sport. I have been replacing many parts due to the previous owners neglect. In some of the renovations/upgrades. I have replaced the factory front shocks and springs. Up front now resides 2000 polaris shocks, and springs. The longer travel is great. I realigned the front wheels. I did it to polaris specs. They are true front and back. Now when I ride and take a turn hard I get lift on the opposed rear wheel. What I mean is. If I turn hard left, the rear left wheel lifts. To I have to rely on a slide in a turn. Before I redid the front wheels. They were way off. Both fronts were pointing outward. It made riding a little difficult. But on the turns it was stable. What gives? Do I need to adjust the rear shock harder or softer? Any help would be great.

THanks

 

i would try soften up the rears and see if that helps ... if not, the front my be to tight.

 

That sucks if the front is too tight. It is all new. Springs and polaris shocks. Hope softening the rear helps

 

When you aligned it, did you measure from tire to tire(both on the front and rear side of the front tires) and you should have about a 1/4" of tow out, or the front should be out in other words. It is going to do the lifting a little, that is nature. Your rear shock should have nothing to do with it, unless it is really hard. Try hardening up the fronts.

 

sounds like either the whole setup is too stiff or the fronts are too soft and teh backs are too stiff