@HELP 500 Predator SLip ON@
#12
02-25-2005, 06:12 PM
Join Date: Jun 2004
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
#14
02-27-2005, 11:49 AM
Join Date: Jun 2004
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
@HELP 500 Predator@
Well here it is!!!
Can someone look at my pixs? in the last pix with the predator, showing my pure polaris slip on. Question is why does the end tip look so different than the new oval ones is this a different model. And the end tip is all rusty! is there an end cover missing???
Can someone look at my pixs? in the last pix with the predator, showing my pure polaris slip on. Question is why does the end tip look so different than the new oval ones is this a different model. And the end tip is all rusty! is there an end cover missing???
#15
02-27-2005, 12:09 PM
@HELP 500 Predator@
looks like someone did there own mod to the pipe...looks like it just has the quiet core and not the discs or the end cap.. the first thing I would do is tighten the chain and get some chain lube on it..other then that it looks pretty good...and maybe send the header to jet-hot and have it coated....I think I have pics in my profile if ya want to check them out.....Later and congrats.....
#16
02-27-2005, 12:29 PM
Join Date: Jun 2004
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
@HELP 500 Predator@
Originally posted by: Predator38
looks like someone did there own mod to the pipe...looks like it just has the quiet core and not the discs or the end cap.. the first thing I would do is tighten the chain and get some chain lube on it..other then that it looks pretty good...and maybe send the header to jet-hot and have it coated....I think I have pics in my profile if ya want to check them out.....Later and congrats.....
looks like someone did there own mod to the pipe...looks like it just has the quiet core and not the discs or the end cap.. the first thing I would do is tighten the chain and get some chain lube on it..other then that it looks pretty good...and maybe send the header to jet-hot and have it coated....I think I have pics in my profile if ya want to check them out.....Later and congrats.....
Should I go buy the discs and/or the end cap? Why would the prev owner have it off???
#17
02-27-2005, 01:16 PM
@HELP 500 Predator@
You'll need the disks and the end cap, I don't know what is on your pipe now........but it looks crappy and probably doesn't do its job. These parts I just told you about can get kinda expensive though............I have some disks I can help ya out with if you pm me again, I have what comes stock with the pipe(10 I think)......but You'll need to get the end cap and some bolts.............I can give you a place to get that stuff too if ya need me to.
#18
02-27-2005, 02:33 PM
Join Date: Jun 2004
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
#19
03-01-2005, 07:57 PM
@HELP 500 Predator@
Hey Daranello,
I have an 03 with the PP slip on. I looked at your pics. Someone has taken off the plates and oval tip, and rigged a turn down.
Polaris or White Bros should be able to help you. Or maybe Rath or Nicholas.
The Predator chain is touchy on tightness. Run it to spec (tighter than most, check the book), or you may hear some ungodly sounds that will scare you (it's not the tranny coming apart).
I have had no tranny problems with mine.
I have an 03 with the PP slip on. I looked at your pics. Someone has taken off the plates and oval tip, and rigged a turn down.
Polaris or White Bros should be able to help you. Or maybe Rath or Nicholas.
The Predator chain is touchy on tightness. Run it to spec (tighter than most, check the book), or you may hear some ungodly sounds that will scare you (it's not the tranny coming apart).
I have had no tranny problems with mine.
