Team rapid roller secondary
#12
Team rapid roller secondary
Got my Team rapid roller from HSP and it came installed with a black-yellow spring which is rated at 85-115. It's got to be going to full shift out too soon as WOT rpm are only 5,000 rpm out of the hole. I'm guessing I need a secondary spring with a higher spring rate. Anyone know secondary spring rates on the 700 EFI and 800 EFI?
#13
#14
Team rapid roller secondary
Originally posted by: speedguy
There are 85-115. Have you called our tech line? What primary spring rate and gram weigths are you running you are about 1000 rpm short of were you should be.
There are 85-115. Have you called our tech line? What primary spring rate and gram weigths are you running you are about 1000 rpm short of were you should be.
Originally posted by: speedguy
Team already has all of the set-ups pretty much figured out but for your machihne we set them up with a rubber dampened sec. which comes std on all of the efi models a 61-58 helix and a 105-185 sec. spring.
Team already has all of the set-ups pretty much figured out but for your machihne we set them up with a rubber dampened sec. which comes std on all of the efi models a 61-58 helix and a 105-185 sec. spring.
#19
Thread
Thread Starter
Forum
Replies
Last Post
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
09-09-2015 09:38 AM
Elkaholic
Land, Trail and Environmental Issues
1
09-06-2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)