yeah i was just needing some help on some jetting info. It's the 350L two stroke engine and it's completely stock. I was wondering where i should be on my jetting, i need some ballpark figures here to get me started. I live in missouri and the elevation is about 1000ft above sea level, temperature is 30 to 40 degrees outside where should i start. I believe stock main is #200 and the pilot is a #30 i think. But i need some guesstimations on where i should start. thanks.

 

bump

 

a #200 main and #30 pilot should be ok, air screw 3/4 turn