Clutch kit for 400 Sport????
#1
Clutch kit for 400 Sport????
Well i ordered the CPI inframe exhaust,anyway I was wondering if anyone had any suggestions as to which clutch kit to go with?I am leaning towards the HPD drag, but I was wondering if i will still be able to play ride trails and such?I do love to line up some to though.Thanks,Marvin
#2
Clutch kit for 400 Sport????
Hey Marvin. Glad you got that pipe! Hey I run two different setups that I really like. If you want to save a little money then just buy the springs. I run the HPD blue primary and stock weights with the hpd violet secondary in the 2-2 position. This is an excellent trail/drag setup. It's really inexpensive too. If you want all out acclerration with a good drag setup then the hpd violet(not sure they make this spring anymore) with the 10-56 series weights is a good setup as well. If you are like me and just dune or ride trails then the HPD blue with stock weights will probably do you just fine. If you don't like the high stall clutch then theres all kinds of different clutch setup you can do. I just recently put my CPI on my wifes trail mod with a really mild clutch engagement and it pulled really strong all the way from bottom to top.
#4
#5
#6
Clutch kit for 400 Sport????
I sent an email to HPD a while back to see what I needed to run on a non ported setup.
the response I got was to use a 280main no airbox lid and a polaris blue sled spring (same as the one hpd sells) and not to worry about the secondary.
I would definatly get a secondary spring like dune suggested.
the response I got was to use a 280main no airbox lid and a polaris blue sled spring (same as the one hpd sells) and not to worry about the secondary.
I would definatly get a secondary spring like dune suggested.
Thread
Thread Starter
Forum
Replies
Last Post
cdstang
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
08-31-2015 07:52 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)