Is there anyone that makes wheel spacers smaller than 1"? I would like to have some 1/4" or 1/2" spacer for mr SP 800. I do know that you can get 1/4", 1/2" & 3/4" for the autos so does any one make them for ATV's? I put 9" tire on the front of my 800 and now there is only like 1/8" to 3/16" of clearance between the tire and tire rod end. A thin spacer would give a little sence of security.


Thanks

Robert

 

If you only want a 1/4 of an inch. I would use a thick washer on each stud.

 

yeah, if you don't want an inch, just add washers to the studs to get the spacing you want. no one makes spacers under an inch(that i've seen)