scrambler wheel hubs (help)
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
My quads rear wheels(stock) have a 4/4 bolt pattern on a 1" axle, I was wondering if anyone knows where to get some new hubs or spacers that will fit a 1" axle but with a 4/156 bolt pattern?
Im having trouble finding some, can somebody help me out? I found some on ebay but they specifically say "Will NOT fit Polaris ATVs due to the stud diameter"
I see alot of scramblers out there with different wheel setups than stock, and I have no problem finding a decent set of rims to fit the fronts, but I cant find anything that will fit the stock rear hubs
I did find some spacers that are a 4/4 bolt pattern to 4/156 for $100 bucks but then I add an inch to each side at thats the last thing I want to do is go wider. plus they couldnt gaurentee to get them to me in time for my next race
Im having trouble finding some, can somebody help me out? I found some on ebay but they specifically say "Will NOT fit Polaris ATVs due to the stud diameter"
I see alot of scramblers out there with different wheel setups than stock, and I have no problem finding a decent set of rims to fit the fronts, but I cant find anything that will fit the stock rear hubs
I did find some spacers that are a 4/4 bolt pattern to 4/156 for $100 bucks but then I add an inch to each side at thats the last thing I want to do is go wider. plus they couldnt gaurentee to get them to me in time for my next race
#3
#4
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
i have stock pred hubs for my scrambler, and they are from 03. bolt pattern 4/156. every year after 03 the bolt patterns are 4/110.
you can find billet hubs on ebay, and both bolt patterns,, but youll find the the pred hubs are just a little long. they will need to be machined down about a 1/4 inch on the back side so that theyslide onto the axle all the way, and so the castle nut threads on all the way.
the 4/110 pattern will offer a wider range of wheel options too.
hope this helps...
X
you can find billet hubs on ebay, and both bolt patterns,, but youll find the the pred hubs are just a little long. they will need to be machined down about a 1/4 inch on the back side so that theyslide onto the axle all the way, and so the castle nut threads on all the way.
the 4/110 pattern will offer a wider range of wheel options too.
hope this helps...
X
#5
Thread
Thread Starter
Forum
Replies
Last Post
blueandy88
Classifieds, Garage Sale & Swap Shop
0
08-30-2015 08:26 PM
Cantbuytime
Drivetrain, Suspension & Tires
0
08-16-2015 09:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)