Front/Rear Springs on SP700 EFI
#1
Front Springs on SP700 EFI
I have read a lot about installing different springs for the front and the rear of sportsmans. My question is which is the best combination for this scenario:
Using the machine to haul firewood on a little trailer or a "hitch-haul", hunting the back 40 with a buddy on the back pulling a small trailer with a load of decoys and blinds, and just all around riding (trails, yard, fields, etc). Me and the buddy together weigh over 500 pounds plus guns and hunting packs.
With the stock springs, there is a lot of sag in the front and rear. I have the hunter special with the 2500# warn winch in front, the brushguard (for plowing trees in the woods at dark after a few Selects) and the rear brushguard.
Just looking to what others that have upgraded their springs think, do not want to waste money and not be satisfied.
Thanks in advance,
Using the machine to haul firewood on a little trailer or a "hitch-haul", hunting the back 40 with a buddy on the back pulling a small trailer with a load of decoys and blinds, and just all around riding (trails, yard, fields, etc). Me and the buddy together weigh over 500 pounds plus guns and hunting packs.
With the stock springs, there is a lot of sag in the front and rear. I have the hunter special with the 2500# warn winch in front, the brushguard (for plowing trees in the woods at dark after a few Selects) and the rear brushguard.
Just looking to what others that have upgraded their springs think, do not want to waste money and not be satisfied.
Thanks in advance,
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)