Polaris Discussions about Polaris ATVs.

need help!05-400,lost 4hi.no hookup and go-slow

Thread Tools
 
Search this Thread
 
Old Jan 19, 2007 | 01:46 AM
  #1  
3gun05sportsman400's Avatar
Thread Starter
|
Trailblazer
Joined: Jan 2007
Posts: 39
Likes: 0
From: SINCITY,NEVADA
Default need help!05-400,lost 4hi.no hookup and go-slow

ihave a 05 sportsman400-with a ebs-clutch,200 hours on it.i was getting on it,in 4hi at approx.55mph,hit a whoop<almost sent the rearend over the frontend>in that panic<looking down at the ground-ican't remember where the rpm's where?landed-HARD,came to a stop,relaxed and tried to take off in hi,motor reving up2 5 thousand r's and slowly moved forward very slow,4low and 2low?it work's great!so i replaced the ebs with a comet drive clutch,helped about 5%,now i get up to 20mph-it takes off and go's to about 55-58 mph.?i'm now thinking i threw a shoe in the rear Driven clutch.reverse okay.i have a jetted carb<dynojet>a procom ignition box,and kn filter<all brand new>hoping someone know's the answer,a quad shop owner here in vegas,say's he seen this before?approx.$200 to fix?need some insite please.it's been 6 week's of driving me bonkers!!!!!!
 
Reply
Old Jan 19, 2007 | 08:19 PM
  #2  
Kerbbirds's Avatar
Pro Rider
Joined: Jun 2005
Posts: 2,343
Likes: 0
Default need help!05-400,lost 4hi.no hookup and go-slow

You broke the slide buttons on the secondary clutch, there are three buttons in it and if you hit the ground with tires spinning it wii break them.
 
Reply
Old Jan 20, 2007 | 08:08 AM
  #3  
3gun05sportsman400's Avatar
Thread Starter
|
Trailblazer
Joined: Jan 2007
Posts: 39
Likes: 0
From: SINCITY,NEVADA
Default need help!05-400,lost 4hi.no hookup and go-slow

cannot say thank's,enough!!!!thought so?really wasn't 4sure!ur a life savor!!!!!!!!!!!again thank you-bud. dave w
 
Reply
Old Jan 21, 2007 | 06:27 AM
  #4  
3gun05sportsman400's Avatar
Thread Starter
|
Trailblazer
Joined: Jan 2007
Posts: 39
Likes: 0
From: SINCITY,NEVADA
Default need help!05-400,lost 4hi.no hookup and go-slow

another?i'm now looking in the service manuel,i went to buy the button's,when the <polaris dealership>said?this set-up didn't use them,it used a 3 taper roller set-up.in all this,i relize two different clutch set up in theory!won't work right .a belt nightmare i for see.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95wolv
Honda
7
Sep 27, 2024 12:00 PM
lonerider856
Suzuki
20
Oct 13, 2023 03:45 PM
Nosniborpapa
Kawasaki
4
Sep 19, 2015 07:07 PM
bvolks
Kawasaki
8
Sep 13, 2015 12:57 PM
bigbear350quad
Yamaha
0
Sep 11, 2015 12:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 10:17 AM.