Hey guys i just got a 48" cycle country plow for my 99 Xplorer 300 and ive only used it once and we are suppose to be getting some more snow tonight so i was gettin everything ready when i notice that one side of the plow is wearing on one side and not the other. were it scrapes the ground. I kinda checked some stuff but cant really figure out how to get the plow so its level so it scrapes evenly. when i installed it i followed driections and didnt see anything that you can really adjust. so any help would be very much appreciated.

 

DOES IT HAVE FEET, ADJUST THEM

 

yea it has them but they are both up pretty far so i dont think thats it. i didnt know if adjusting the springs on either side would effect it or if it had somethin to do with the manual lift

 

I would adjust the skid plates so their even then first. Have you been plowing with the blade angled to the side thats wearing? Try adjusting the plates so that the blade is level all the time angled or not angled

 

Ok i will try to adjust the skids. Also its actually wearing on the opposite side that i have had it angled.