Polaris Discussions about Polaris ATVs.

325 magnum bogs

Thread Tools
 
Search this Thread
 
  #1  
Old 10-09-2007, 11:33 AM
trybaj17's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2007
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default 325 magnum bogs

i was riding down in southern illinois this past weekend and i noticed when i went threw a mud/ water hole it would bog when i gave it full throttle. this also happend when i was driving on the trails and,i let it warm up for 10 min. and it bogged when i went to give it full throttle, i was giving a family member a ride the whole week b/cthey dont have a quad. why is it doing this?
 
  #2  
Old 10-09-2007, 01:01 PM
deanz400's Avatar
Pro Rider
Join Date: Feb 2004
Posts: 1,981
Likes: 0
Received 2 Likes on 2 Posts
Default 325 magnum bogs

need more info ,but in generel sounds like wires shorting out ,
 
  #3  
Old 10-09-2007, 01:47 PM
trybaj17's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2007
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default 325 magnum bogs

it seemed like from 3/4 to full throttle it would loose powertehn about 5 or 10 minutes later it would run fine. it kept doing this for the whole weekend. it seemed like it had no power for the time when it acted up at 3/4 to full throttle. then other times it had all the power it usually has.
 
  #4  
Old 10-09-2007, 03:56 PM
deanz400's Avatar
Pro Rider
Join Date: Feb 2004
Posts: 1,981
Likes: 0
Received 2 Likes on 2 Posts
Default 325 magnum bogs

did the engine actually bog or maybe the belt slipped ?
 
  #5  
Old 10-09-2007, 06:06 PM
trybaj17's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2007
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default 325 magnum bogs

no the engine did not rev up like the belt was slipping. it boged down. i also noticed a smell. i cant explain the smell.
 
  #6  
Old 10-09-2007, 10:25 PM
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Join Date: Apr 2000
Posts: 6,688
Likes: 0
Received 1 Like on 1 Post
Default 325 magnum bogs

Check the belt and the secondary clutch buttons
 
  #7  
Old 10-10-2007, 12:08 AM
trybaj17's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2007
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default 325 magnum bogs

would that make the engine bog down? how? why?
 
  #8  
Old 10-10-2007, 07:57 AM
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Join Date: Apr 2000
Posts: 6,688
Likes: 0
Received 1 Like on 1 Post
Default 325 magnum bogs

yes it can cause a bog if the secondary inst working right it can load the engine up.
 
  #9  
Old 10-10-2007, 09:30 AM
deanz400's Avatar
Pro Rider
Join Date: Feb 2004
Posts: 1,981
Likes: 0
Received 2 Likes on 2 Posts
Default 325 magnum bogs

if the clutch is n't shifting right ,like not backing down then it would be trying to pull amuch higher gear thus bogging the engine down ,
pull the cover off and blow all the belt dust out of the clutch area .
 
  #10  
Old 10-10-2007, 05:25 PM
trybaj17's Avatar
Trailblazer
Thread Starter
Join Date: Aug 2007
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default 325 magnum bogs

Im at school right now, the next time i will be able to ride my quad is in about three weeks. Im thinking of changing the clutch springs in the summer to an EPI primary, and a aaen blue secondary. Will it hurt the quad if i wait till then to check the secondary buttons?? Should i replace the belt? i think its the orginal from 2002? what should i look for with the secondary buttons?? what does the helix do in the PVT??
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gwolf228
Polaris
3
02-18-2017 01:36 AM
handyjc1
ATC 3-Wheelers
1
10-23-2015 07:15 PM
Sassinm1
General Chat
1
09-30-2015 04:23 AM
Nosniborpapa
Polaris
5
09-12-2015 05:54 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
1
09-09-2015 06:57 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 325 magnum bogs



All times are GMT -5. The time now is 10:00 AM.