Winch Trouble
#1
I was out plowing the 8 inches of snow we got last night and my winch will not winde in, It will winde out no problem..... When I try to pull it back in, I just hear a clicking noise.... Any Ideas?????
#4
Scrammy is right, the contactor for sure. Mine has been like this since new, my own fault for not taking it back in. It does this sporadically, I've been able to get through a full season of snowplowing, just have to press the button repeatedly until it catches.
Best to see if you can get a new one, or you can do like me and just put it with it until it fails completely.
Best to see if you can get a new one, or you can do like me and just put it with it until it fails completely.
#6
It was the contact relay. I took it to the dealer yesterday and they replaced it for free - still under warranty. Got it back in time to plow the new 6 inches of snow that fell. Thanks for all the input.....
#7
there you go. got to like them replacing parts for nothing and now you what to look for if it does it again some day.
Trending Topics
#8
IF it's the "Polaris winch" not the one made by WARN for Polaris (there are 2 different 2500 lb winch's offered), it's pure junk.
I have been back 3X to my Dealer with problems first with it free-spooling out on it's own, then not raising, and now the f-in thing won't go down!!!
Look, the non-Warn winches offered by Polaris are pure JUNK.
My Dealer has agreed to replace my POS with the Warn3.0 XT. They are going to charge me only the difference in part price plus a nominal labor charge to R+R.
I don't think there is a fix for the non-Warn ones. In fact, someone wrote that they are built in China.
They are expecting mine to arrive early next week.
(FYI, I have owned at least 15 new ATV's and never had a prob with any of my Warn winches)
My best advice to you'all is to replace yours with a good brand-name winch!
~MT
I have been back 3X to my Dealer with problems first with it free-spooling out on it's own, then not raising, and now the f-in thing won't go down!!!
Look, the non-Warn winches offered by Polaris are pure JUNK.
My Dealer has agreed to replace my POS with the Warn3.0 XT. They are going to charge me only the difference in part price plus a nominal labor charge to R+R.
I don't think there is a fix for the non-Warn ones. In fact, someone wrote that they are built in China.
They are expecting mine to arrive early next week.
(FYI, I have owned at least 15 new ATV's and never had a prob with any of my Warn winches)
My best advice to you'all is to replace yours with a good brand-name winch!
~MT
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
Feb 3, 2016 05:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




