I want to put rear work lights and the reverse override lock on my 08 sportsman 800. what is the best way to cut out the templates on the back of the headlight pod

 

i used a toggle switch with a water proof rubber cover/nut
i mounted it underneath the pod on the left side so its out of the way
i got the switch at napa but any parts store should have one

 

personally, i would use a dremel tool to zip out most of it and then a sheetrock knife to clean up the edges and make the corners

 

<div class="FTQUOTE"><begin quote>Originally posted by: brutus450

personally, i would use a dremel tool to zip out most of it and then a sheetrock knife to clean up the edges and make the corners</end quote></div>
That's exactly what I did, worked great, very easy to do.

 

<div class="FTQUOTE"><begin quote>Originally posted by: 800rider

I want to put rear work lights and the reverse override lock on my 08 sportsman 800. what is the best way to cut out the templates on the back of the headlight pod</end quote></div>

sent a pm to your question.