2000 Scrambler clutch engagement RPM?
#1
2000 Scrambler clutch engagement RPM?
I'm poppin my cherry! I recently bought a 2000 Scrambler 500 & the clutch engages @ a higher RPM than I'm use to. I had a 98 Sportsman & when u gassed it it went. The Scrambler needs 1/8 to 1/4 throttle to engage. The last owner said the clutch was not stock. Should I be concernerd? It engages at the same time FWD & RVS & pulls fine from there on out. Leave it & try it or ? Thanks!
#2
2000 Scrambler clutch engagement RPM?
you should've asked him what he had in it for a clutch kit or differnt springs. if you dont like how high it is then its an easy fix by changing springs once you pull the cover off. ask ftwflt what the stock set up is and he mostly can help you out since hes delt alot w/ his scrambler.
#3
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
#4
2000 Scrambler clutch engagement RPM?
So I finally pulled the cover and looked at the clutch. The spring is silver. This is stock? I took the scrambler out last week and did some hill climbing. It seemed as if it wasn't hooking up fully at higher rpm's. Could this be the buttons I've read about? Should I rebuild the front & rear clutches? Thanks
#7
Trending Topics
#8
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
#9