I installed grip heaters and need to remove the black cover with dash display. I popped out the dash display but can not seem to get the cover off. I see no screws and the back half seems to be snaped in but the lower part between the headlights will not budge. Is there an easy way to remove this? I need to get to the acc. wiring to connect the switch.

Thanks in advanced [img]i/expressions/face-icon-small-smile.gif[/img]

 

Read your manual. It tells you haove to remove the front cab. That would be the easier way to get to the entire harness
The entire nose comes off. I dont know what is holding the dash in.

 

Yea I was trying to just remove the black piece but didn't happen. I ended up removing the whole front and found out thats the only way to get to everything. Got the grip heaters wired in and they work amazing. Grips get nice and toasty [img]i/expressions/face-icon-small-smile.gif[/img]