ITP Wheels
#1
ITP Wheels
Hey guys I am going to buy some ITP C-series type 5 or 6 wheels for my 800 efi, i have mudlite 26x10 on the front, what offset is required so i no longer have to use the spacers? it seems like the rim comes with a 4+3 is that correct or is there a different offset i need? Thanks alot guys you always seem to save people time and money, keep on wheelin!
#3
#4
ITP Wheels
The offset first number is from the center of the mounting part (Where the bolt holes are) to the inside bead edge. The 2nd number is from the center of the mounting part to the outside bead edge. Both numbers must add up to the rim width between the beads (Your example from above - 4+3 =7" width).
If your stock rim offset is 4+3 (7" wide rim), then go with 3+4 and gain 2" of total width (total including both sides). If you want even more, go with 2+5 for 4" of total additional width compared to the 4+3 rims.
If your stock rim offset is 4+3 (7" wide rim), then go with 3+4 and gain 2" of total width (total including both sides). If you want even more, go with 2+5 for 4" of total additional width compared to the 4+3 rims.
Thread
Thread Starter
Forum
Replies
Last Post
badgerboy1
Trailers, Toy Haulers, Motorhomes.
5
09-26-2017 06:11 PM
ATVC Correspondent
Performance Mods and Project Quads
5
10-10-2015 10:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)