How to replace worn primary slide buttons ?

Reply Subscribe

Thread Tools

Search this Thread

Jul 10, 2008 | 12:03 AM

thefed

Thread Starter

Trailblazer

Joined: Jul 2008

Posts: 50

Likes: 0

How to replace worn primary slide buttons ?

It was suggested that I look into these buttons as the culprit of a slight knock at idle. Anywhere I can find a good comprehensive description of how to do this? I hear it's simple....

Jul 10, 2008 | 12:06 AM

ftwflh

Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!

Joined: Apr 2000

Posts: 6,688

Likes: 1

How to replace worn primary slide buttons ?

Best bet is to take the clutch to a dealer.It takes a specail tool for the spider and a good hold down.

Jul 10, 2008 | 12:09 AM

thefed

Thread Starter

Trailblazer

Joined: Jul 2008

Posts: 50

Likes: 0

How to replace worn primary slide buttons ?

Okay. As I have never torn into a ATV tranny...I'll rephrase my question: How do I go about removing the primary clutch?[img]i/expressions/face-icon-small-happy.gif[/img]

Jul 10, 2008 | 12:14 AM

ftwflh

Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!

Joined: Apr 2000

Posts: 6,688

Likes: 1

How to replace worn primary slide buttons ?

You will need a clutch puller.But it is worth the money because you will find that you will use it quite often.

Jul 10, 2008 | 12:25 AM

old polaris tech

Polaris ATV Expert
Retired and loving it!

Joined: Jun 2008

Posts: 24,350

Likes: 44

From: North Texas

How to replace worn primary slide buttons ?

Take to dealer! Have to have clutch puller as posted above and clutch holder and spyder tool remover! Spyder torqued past 100 lbs. Plus all marks have realign to balance clutch. They shouldn't charge more than 1 hour to 1 hr and half plus parts! Buttons If I remember run about 7-8 bucks each (6 needed) That is If you bring clutch in! Still have to buy/borrow clutch puller. Good luck