R'......There's nothing more plentiful than free advice. Really....NoJoke.

 

Unfortunetly, I haven't been able to find the part number for the ATP locks. Your dealer should be able to find the right number. Just impress on him/her that a guy you know ordered them a couple months ago. The process took me about 2 hours. It really doesn't look any different than the standard ones except for the keyhole in the middle of the ****. I wish I could describe the process to you guys a little better than I did. I just can't remember every step it took. If you're mechanically inclined you should be able to do it.

 

I was able to find a place that lists the ATP box locks online. ATP box locks

 

That's pretty cool , and manufactured by Polaris. I wonder if all the keys are the same?
Polaris probably could have pre installed these , using the same ignition key, that would be nice and worth paying extra for.

 

The ATP locks look good MooseHenden. Any idea on length and diameter?

 

ATP Front Cargo Box Locks

View Larger Image MSRP: $31.05
Web Price: $24.75
You Save: $6.30
Our Item Number: 2874548
Manufacturer: Polaris
Manufacturer Part No: 2874548
Quantity:
* Whole number only
Email this page to a friend
Includes: 2 locks, 2 keys, 2 seals, 2 washers, 2 jam-nuts.

You'd think these were exactly made for Polaris since it says they are manufactured by Polaris

 

they are, the atp is the old version of the x2

 

They are not exact because of the cylinder that the **** and hook turn inside. The ATP is exactly 45 degrees off of the X2 cylinder. So, you have to use the X2 cylinder and hook, and use the ATP lock and ***** if I remember right. I also had to shorten the cylinder by about an 1/8th of inch. It was trial and error until I got it fitting pretty good. You also have to figure out where the pin that comes out of the lock will be in the cylinder and drill a hole large enough for it to lock into. I can't really show any pictures because it won't really show it well. They do look like they belong on there.

 

Has anyone swapped out the front storage box latches for locking latches on an 07' Polaris Sportsman 800 X2?
Would the Polaris ATP Front Cargo Box Locks work for multiple years (05'-08') with some modifications to the locking set?
I'm gunna say yes.

 

iv been thinking about this for awhile. this would be a great idea to do on my 08 500ho.