MAD DOG GRIPS
#1
MAD DOG GRIPS
Does anyone using these grips on their Polaris ATVs
know if the bar ends can be cut for mounting the
Polaris Mirrors? I don't think it can cuz it seems that
the ends inside are metal if you were to cut the rubber
end, but I don't know its just a guess? I want to relocate
my mirror from the bar/winch mount to the bar ends
where they should be.
Thanks for the input!
PICS:
Regards,
R'
know if the bar ends can be cut for mounting the
Polaris Mirrors? I don't think it can cuz it seems that
the ends inside are metal if you were to cut the rubber
end, but I don't know its just a guess? I want to relocate
my mirror from the bar/winch mount to the bar ends
where they should be.
Thanks for the input!
PICS:
Regards,
R'
#2
MAD DOG GRIPS
Here is their home page.You might have to do a contact us to get the info You need.I did`nt see any installation info on them.
http://www.maddoggear.com/dyn_category.php?k=0
http://www.maddoggear.com/dyn_category.php?k=0
#4
MAD DOG GRIPS
I installed the HotGrips hand warmers on My 400 Sportsman and their recommendation was to use a hole saw and drill through the end of the grip for the mirror mount.The hole saw could be no larger than a 7/8" and preferably a 3/4" due to the heat grid in the grip.
That hand grip has such a strange shape to it that a hole saw would probably not work.
You might try a hacksaw to get the end off.
That hand grip has such a strange shape to it that a hole saw would probably not work.
You might try a hacksaw to get the end off.
#5
#6
#7
Trending Topics
#8
#10
MAD DOG GRIPS
Well here is a full wide look for you any of you male member-centric thinking individuals.
<a target=_blank class=ftalternatingbarlinklarge href="http://www.maddoggear.com/dyn_prod.php?p=STRA734&k=76812
">http://www.maddoggear.com/dyn_...STRA734&k=76812
</a>
For some context I only shot the bar ends of my grips to display my thread
discourse. Ya read in any more into that, then your on your OWN! LOL..LOL
Regards,
R'
<a target=_blank class=ftalternatingbarlinklarge href="http://www.maddoggear.com/dyn_prod.php?p=STRA734&k=76812
">http://www.maddoggear.com/dyn_...STRA734&k=76812
</a>
For some context I only shot the bar ends of my grips to display my thread
discourse. Ya read in any more into that, then your on your OWN! LOL..LOL
Regards,
R'