does any one know if a 9" front will fit with the Polaris (Vison) Bruiser Rims??

 

They will fit the rims, I'm on the side of flippin the tie rod and keepin stock width, that gets my vote.

 

I have 10" Mud Lites on aftermarket rims and just flipped the tie rod and it has worked well.

 

i think you could use 1" spacers w/out too much issue if you want to keep the stock rims. i do agree(even though i like my tires)that the xtr side walls arent as strong as i would like. personally i would put spacers on before i would change the steering. imo.

 

I have done it both ways. (With 10" wide front tires) I prefer flipping the tie rod ends. I still think (regardless of what others say) with the spacers on it is harder on the wheel bearings. Also they look ridiculous (IMO) I am running it now with the tie rod ends flipped and it works good. Just my .02

 

I've got 9" XTRs on stock aluminum rims with no clearance issues. Just 2 washers between the wheel and hub. No problems with over 3000 miles

 

I mounted 27x10 and 27x12 greenball devil 2's on stock.1" spacers on front were required.