Problem with 400 Xplorer
#1
Problem with 400 Xplorer
Hey guys new to the forum and I have some questions about my 2001 Xplorer 400.
I purchased this atv used in march of 09 and I am having 1 problem with it that I just cant figure out.
When loaded down or going up a steep hill or when really on the gas it just boggs way down wont rev up and it will backfire through the exhaust once or twice. In neutral it will rev up fine and this thing always starts right up right away. It has a brand new spark plug and a brand new fuel filter. I took the carb off and it looked brand new inside. Anybody have any ideas at what to look for to fix this problem? Also what is the gap supposed to be set at for this particular ATV?
Thanks
I purchased this atv used in march of 09 and I am having 1 problem with it that I just cant figure out.
When loaded down or going up a steep hill or when really on the gas it just boggs way down wont rev up and it will backfire through the exhaust once or twice. In neutral it will rev up fine and this thing always starts right up right away. It has a brand new spark plug and a brand new fuel filter. I took the carb off and it looked brand new inside. Anybody have any ideas at what to look for to fix this problem? Also what is the gap supposed to be set at for this particular ATV?
Thanks
#2
did you take a look at the plug to see if its running lean/rich? could be the float isnt set right and kinda of running out of gas when going up hill(because of float level). you may want to change the oil in the engine damper if it hasnt been changed or at least check the level. did you make sure to have the air screw set correctly on the carb as well? just a couple of ideas
#5
#6
#7
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Trending Topics
#8
#9