Thanks guys for all the responses. I haven't been able to get back to working on the bike. My new seals came in on Friday. I plan on working on it Tuesday. I will try the seals as I have already pulled old seals. If that doesn't work I will try the other things you all have suggested.

Thank you!

 

Ok, The wheeler is running like a top. Once I removed the clutch, I found the crank seal blown out. I bought a bottom end seal and gasket set and replaced all. Now the bad news, while doing so I broke the temp sensor on the head. Does anyone know where I can get one of these and is this the sensor that turns on the fan for the radiator? I ran the engine for about 5 minutes but the fan never turned on so I shut it off. I do not want to burn the engine up after all the work I have done. What is the temp the engine should run at when the fan turns on?

 

Good point. I will try that this afternoon. Any idea why it would not be ok to have the fan run constant if the sensor is bad.

 

Thanks to all, my machine is up and running. I have had it out several times in the last dew days. Cant wait to burn through the tank of double oil and its broke in. So far the thing runs flawlessly.