I did a search and could not find a definite answer. Is the Polaris 800 X2 prewired for a winch? If so location color etc. I have looked around and found a molex plug with a "BIZ" tag on it don't think thats it?

Thanks in advance
David

 

Yes, it is pre wired, this subject has been covered several times, but I will say the search function isn't the greatest.
The wires are under a cover that says something about winch connections or something. It is located under the right front fender, and if you look under there you will see a metal shield, that is for mounting the contactor. Then you need to connect the hot end of that wire to the battery, it is under the left rear fender in shrinkwrap(mine was yellow) near where the ground is. Then your all set

 

well i did a search and came up w/ all kinds of post on winches, but yes as mentioned it's prewired.

 

Installed winch today wiring was just as explained. Thanks for the help.

 

glad all went well.

 

Thanks for posting as you said it's exactly correct now I plan on doing a video for this [/B]