Sometimes when I put my bike in reverse, it dies. If I hold the reverse override button, it stays running. Can I bypass this and if so, will I loose 4x4 in reverse ? Or is it a simple cheap fix ?

 

Welcome to the forum! Pull the front panel and pull the black wire from the reverse limiter module. Should be three (3) small modules,but will be the only one to have a black wire. If this works then you will have full power in reverse without having to push the button from now on so be careful! OPT

 

Will my 4wd in reverse still work ?

 

Yes the awd will work in reverse,you're just eliminating the reverse limiter module only by pulling the black wire. Again you will have full power in reverse without having to push the over ride button so be careful! OPT