1995 scrambler scrambler 400 4x4
#1
#2
Moose carb kits along with Sudco (you can order em at most shops or on ebay) come pretty complete with needle valves, jets, gasket,springs,o-rings,etc. Main difference between kits would be the jets.(may have one size smaller main and one size up on the pilot jet on the 97 kit) If it came down to it you could reuse your main jet and pilot jet if you had to. Plus most people don't replace the float arm and float pin that can wear out (doesn't come with most kits) which you can order through Cycle Parts Warehouse or Cheap Cycle Parts. OPT
#4
You can just replace the needle and seat (needle valve assembly) and reuse the float bowl gasket etc,but if the float arm is wobbly back and forth,best to replace it and the float pin too. Adjust the float arm to where it's parallel with the carb body when held upside down with pressure on the float needle. OPT
Thread
Thread Starter
Forum
Replies
Last Post
exmotocrosser
Polaris
10
09-13-2019 06:12 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)