In neural, engine off OPT

 

 

https://vimeo.com/53789699 Thats the video of my atv

 

Hopefully that video i made can help.

 

Now I can see it,but the exhaust leak is so loud(and I'm half deaf by the way) that's basically all I could hear. The chain looks ok as far as I could see.Just place the machine in neutral,engine off and slowly roll the rear tires and try to hear any bearing noise from the rear housing. Also pull the tire up and down,back and forth to see if you have any axle play at the rear housing along with slowly checking the front and rear sprocket. You do need some new exhaust donuts! OPT

 

Im going out now to do that i will post another video of that.

 

I am currentally uploading the video i will post the link when its done loading.

 

https://vimeo.com/53799526 Thats the new video.

 

Try greasing this dry sounding chain! Plus look care fully at the the sprocket teeth and make sure the chain guide is not the noise maker also. Thought I heard a "pinging/crunching" type noise either from the chain or rear end. Remove the chain master link and let the chain hang loose and see if you can pin point any bearing "crunch" noise from the axle housing by turning the rear wheels slowly. If no noise,then it could just be the dry chain or a frozen link. Plus check for any noise around the brake caliper and pads. You can tell a lot more on the rear end with the chain hanging loose to help track down any noise you're hearing.. OPT

 

Thanks for the info also the tranny is the second 1 so it shouldnt be the problem. I will have to do that tomorrow because it is dark outside and i cant see where im going. I will upload another video tomorrow.