More questions on the blazer
#1
#5
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Why do you want to bore it. If you are replacing the piston and rings, just get it honed. That way if you have problems later, and you HAVE to bore it, you will have plenty of meat on the stock sleeve. If the sleeve is scratched, then just get a .020 over bore and use the Wiseco .020 oversize piston.
X_Scrambler3 is correct, you can go .080 over on the stock sleeve.
If you are looking for more power, get it flowed (ported)from RCR of HPD and look at a head shave as well, but I would stick with the stock sleeve if you can, and use a Wiseco the same size as stock.
X_Scrambler3 is correct, you can go .080 over on the stock sleeve.
If you are looking for more power, get it flowed (ported)from RCR of HPD and look at a head shave as well, but I would stick with the stock sleeve if you can, and use a Wiseco the same size as stock.
Thread
Thread Starter
Forum
Replies
Last Post
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)