Primary Clutch on 99 Polaris Scrambler 500
#1
Primary Clutch on 99 Polaris Scrambler 500
Hey all, new to this, and to four wheeling. I just bought a 99 Scrambler 500 and it has a bad primary clutch. I ordered a new one and the tools to work on it are on the way. However, would like to know if I can install the new primary clutch as a whole new unit or do I have to work with the springs that are on it. Basically, can I remove the old and install the new, put belt back on and go riding or is this a long drawn out process. Thanks for the help in advance.
#2
#3
#4
#5
#6
Did you order a new OEM clutch? Or an aftermarket clutch.....or a used clutch? As OPT mentioned, OEM usually doesnt come with the spring and weights. Just curious as to what your installing.
#7
Sounds like he got a Parts Ace clutch set up for a Scrambler.But I'd still check weights against the oem. Only new one I've seen with spring and weights.Polaris Scrambler 500 Primary Drive Clutch 2x4 4x4 1996 2011 Brand New | eBay Even Niche doesn't supply weights and spring.Polaris Scrambler 500 Primary Drive Clutch 1997 2006 | eBay
Trending Topics
#8
It is an aftermarket clutch. Ordered it off of Ebay through Parts Ace in Michigan. It is brand new with spring and weights installed.
#9
Sounds like he got a Parts Ace clutch set up for a Scrambler.But I'd still check weights against the oem. Only new one I've seen with spring and weights.Polaris Scrambler 500 Primary Drive Clutch 2x4 4x4 1996 2011 Brand New | eBay Even Niche doesn't supply weights and spring.Polaris Scrambler 500 Primary Drive Clutch 1997 2006 | eBay
You are correct. The guy that was helping me figure out the initial problem with the quad stated that it was a good clutch that he had used before. I will be sure to check it out well prior to installing it. Got enough into the used quad, don't want to mess anything else up.
Thanks for your reply and apologize for my late one.
#10
You are correct. The guy that was helping me figure out the initial problem with the quad stated that it was a good clutch that he had used before. I will be sure to check it out well prior to installing it. Got enough into the used quad, don't want to mess anything else up.