1994 trailblazer float setting
Oct 6, 1999 | 08:55 PM
#2
Weekend Warrior
Joined: Sep 1999
Posts: 1
Likes: 0
If you take the carb appart(the bottom bowl)
and set it on a flat(level) surface and look at the float "tangs" and make sure they are even with the mounting flange(were the gasket is).
If they "tangs"are even then it is set correctly.
If the carb is overflowing look at the needle and seat(for wear or dirt)
If you have any more questions just ask
Steve - xpoltech
and set it on a flat(level) surface and look at the float "tangs" and make sure they are even with the mounting flange(were the gasket is).
If they "tangs"are even then it is set correctly.
If the carb is overflowing look at the needle and seat(for wear or dirt)
If you have any more questions just ask
Steve - xpoltech
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
Dec 7, 2015 05:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)