Polaris Discussions about Polaris ATVs.

Sportsman Throttle cable end piece

Thread Tools
 
Search this Thread
 
  #1  
Old 06-15-2017, 12:46 PM
m2cyclone's Avatar
Trailblazer
Thread Starter
Join Date: Dec 2013
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default Sportsman Throttle cable end piece

I have a 98 sportsman 500 and have lost the small end piece that holds/connects the throttle cable to the carb butterfly.
Its the larger brass looking part that hold the small cable end.
anyone know where I can pick one up or another option.
I guess a universal cable will have the larger end. just thought I'd check if these pieces were sold or not.

thanks
 
  #2  
Old 06-15-2017, 12:51 PM
m2cyclone's Avatar
Trailblazer
Thread Starter
Join Date: Dec 2013
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

just found one.. everyone wants 17 for that puppy.. anyone know of a replacement cable that would get around not having that piece.

http://www.partzilla.com/parts/detai...P-3130543.html
 
  #3  
Old 06-15-2017, 02:15 PM
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Join Date: Jun 2008
Location: North Texas
Posts: 24,352
Likes: 0
Received 33 Likes on 33 Posts
Default

You can find then for 12 bucks on ebay,but shipping is around 6 bucks.Either way an expensive piece of brass. Easy little part to slip out of your hands as I've dropped a few over the years.
 
  #4  
Old 06-15-2017, 02:26 PM
m2cyclone's Avatar
Trailblazer
Thread Starter
Join Date: Dec 2013
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks,
I searched far and wide for them.. I finally broke down and got one.. was hoping there was a cheaper alternative. guess i could make one.. but I guess my time is worth a little.
I thought about using a small screw, but that might cut the cable and break while riding..
 
  #5  
Old 06-15-2017, 02:32 PM
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Join Date: Jun 2008
Location: North Texas
Posts: 24,352
Likes: 0
Received 33 Likes on 33 Posts
Default

On the throttle cable guide I wouldn't take chances with a home made part. Remember to adjust the throttle cable to where you only have 1/8" slack at the thumb lever so the etc contacts won't touch.
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:15 AM.