no power to my trigger coil
#1
#2
First off make sure the battery is ok,load test to be sure. Should have 520 ohms resistance between white and white/red wires of the pick up coil. Face of the pick up coil should be between .016-.030 from the flywheel strip.Disconnect the black wire from the cdi and see if it has spark. Also disconnect the yellow/red from the regulator. If still no spark,the cheap 5 buck manual goes into better detail on testing the stator,etc.
Thread
Thread Starter
Forum
Replies
Last Post
Paul Turner
1) Engine problems..
13
09-28-2017 08:06 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)