Rear master cylinder...wtf!!!!
Aug 3, 2018 | 12:50 AM
#12
Thread Starter
|
Weekend Warrior
Joined: Jan 2018
Posts: 13
Likes: 0
Originally Posted by Yooper265
Yeah just a small price difference 😂. Literally no aftermarket brands for this bike.
Aug 3, 2018 | 12:51 AM
#13
Pro Rider
Joined: Oct 2012
Posts: 255
Likes: 2
From: Ontonagon
Aug 3, 2018 | 12:53 AM
#14
Thread Starter
|
Weekend Warrior
Joined: Jan 2018
Posts: 13
Likes: 0
Originally Posted by Yooper265
They're everywhere -
1910627 Polaris Cylinder, Master $124.27 - 2WheelPros
1910627 Polaris Cylinder, Master $124.27 - 2WheelPros
AFFFFTTTTEEERRRRMMMARRRKEEETTTTTTT
Aug 6, 2018 | 12:27 PM
#16
Trailblazer
Joined: Mar 2018
Posts: 72
Likes: 1
The one on the bike is mine installed, the only pic I have right now. The other picture is one that is SIMILAR. But NOT a replacement. But it shows the lower portion which is the same. I just found a used one on eBay that looks BEAT! And probably needs a rebuild once I get it but it's literally the only one I have found that isn't over $100. Rediculous... if my bolt pattern on my bike was somewhat universal then I could get cheap china brand masters for $10 stupid bucks.Attachment 29172Attachment 29173
https://www.ebay.com/itm/Rear-Brake-...LH_TitleDesc=0
Aug 6, 2018 | 12:30 PM
#17
Thread Starter
|
Weekend Warrior
Joined: Jan 2018
Posts: 13
Likes: 0
Originally Posted by polman500
I'd get the old one off and do some measuring. From the looks of it I suspect you could make one of the Chinese knock offs for the pit bikes would work. They look very similar if you can match up the bolt holes.
https://www.ebay.com/itm/Rear-Brake-...LH_TitleDesc=0
https://www.ebay.com/itm/Rear-Brake-...LH_TitleDesc=0
Thread
Thread Starter
Forum
Replies
Last Post
shockwave
Honda
1
Mar 13, 2002 10:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
