2003 Scrambler 500 weak spark
Jun 23, 2019 | 08:45 AM
#1
Thread Starter
|
Weekend Warrior
Joined: Jun 2019
Posts: 1
Likes: 0
2003 Scrambler 500 weak spark
So im having this problem with my scrambler 500. i bought the bike non running for a decently cheap price. i had a little bit of spending money so i went ahead and replaced the carb, stator, pickup,cdi box, key and ignition, and the ignition coil. i was sure to gap the pulsar at the right specs. im getting only around 3 to 4 volts to the plug. its pulsing like its supposed to, just very weak. not enough to light the plug up. ive checked the awd switch, and everything that could kill it. i even un hooked the black wire at the CDI to bypass any kill switches. checked all my grounds, im at a stand still. ive also checked all of the resistances from the stator, pickup, coil(etc). they all seem to be in specifications. if anyone has any suggestions it would be highly appreciated. thanks.
Jan 17, 2024 | 05:40 PM
#2
Weekend Warrior
Joined: Jan 2024
Posts: 1
Likes: 0
So im having this problem with my scrambler 500. i bought the bike non running for a decently cheap price. i had a little bit of spending money so i went ahead and replaced the carb, stator, pickup,cdi box, key and ignition, and the ignition coil. i was sure to gap the pulsar at the right specs. im getting only around 3 to 4 volts to the plug. its pulsing like its supposed to, just very weak. not enough to light the plug up. ive checked the awd switch, and everything that could kill it. i even un hooked the black wire at the CDI to bypass any kill switches. checked all my grounds, im at a stand still. ive also checked all of the resistances from the stator, pickup, coil(etc). they all seem to be in specifications. if anyone has any suggestions it would be highly appreciated. thanks.
I’m in the same boat
Thread
Thread Starter
Forum
Replies
Last Post
Tinman07
Technical and How-To Articles
1
Mar 3, 2018 05:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
