1996 Xpress oil injection issue/questions
#1
1996 Xpress oil injection issue/questions
Working on my first 2 stroke ATV. I am not familiar with oil injection at all, with the exception of reading about it online.
This thing sat for a while! Had some water in the engine as there was no air filter and it sat outside. Cleaned the carb, replaced the starter, and fired it right up! Ran it on some oil mixed fuel for right now. With the oil injection line off the carb, a very tiny amount of oil came out (a few drops), almost nothing after about 60 seconds with some engine revving. The cable is working for the oil injection, is the amount that comes out normally very small like that?
This thing sat for a while! Had some water in the engine as there was no air filter and it sat outside. Cleaned the carb, replaced the starter, and fired it right up! Ran it on some oil mixed fuel for right now. With the oil injection line off the carb, a very tiny amount of oil came out (a few drops), almost nothing after about 60 seconds with some engine revving. The cable is working for the oil injection, is the amount that comes out normally very small like that?
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)