All too common NO SPARK issue. Ugh help!
Jan 1, 2024 | 03:19 PM
#1
Thread Starter
|
Weekend Warrior
Joined: Jan 2024
Posts: 1
Likes: 0
All too common NO SPARK issue. Ugh help!
Picked up a old true barn find. 1987 cyclone 250 2x4. Been sitting 20yrs but looks great still. Rebuilt the carb, cleaned out the tank and no spark. Replaced coil, no luck. Checked with a volt meter white to ground .550
From stator: blk/red to ground .165
White to ground I get continuity beep
Brown/WHT to ground. 141
Blk/red to white .164
Brwn/white to white .141
Blk/red to brwn/white I get continuity beep .028
When I pull the starter cord the indicator light on bars lights up so I assume stator is working and I tried unplugging black from cdi and still nothing. Key is on and so is switch. Any advice would be greatly appreciated! Thank you in advance
From stator: blk/red to ground .165
White to ground I get continuity beep
Brown/WHT to ground. 141
Blk/red to white .164
Brwn/white to white .141
Blk/red to brwn/white I get continuity beep .028
When I pull the starter cord the indicator light on bars lights up so I assume stator is working and I tried unplugging black from cdi and still nothing. Key is on and so is switch. Any advice would be greatly appreciated! Thank you in advance
Thread
Thread Starter
Forum
Replies
Last Post
Mitten72
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
Sep 29, 2021 10:01 AM
slingblade01
Chinese Quads
1
Jun 30, 2021 07:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)