well, if you wanted to smoke anythinmg in your path, there is a 40 hp kit that u can get for the TB , dont no anything about it but im sure somone here does.

 

ok im looking to make my trailblazer 250 quicker as cheap as possible. im lookin at maybe tryin to find a way to wheelie walk or just to get the front end up. i was wondering if a clutch kit makes the difference. i alread have purchased a brown primary spring which is two steps up from the stock one and it has made some difference but im looking for more than that.

 

ya the brown will help, i have it but its not enough for me. if u have like 50 bucks u can get the hpd red/yellow with 55 gram weights or if u want u can just get the ritter cycle stage one kit for 325 bucks. u could have the kit come with the red/yellow then u can get the 55 gram weights, they are 10 bucks a piece(u need three)(or u can just find a set of stock scrammy weights(they are the same). and i would also recamend a secondary spring, it will make a big difference in back shift, and u get a new air filter with the stage one. with the pipe and those springs and weights u should be able to pick up the front end with ease. but if u wanted u could just get the primary spring, weights and the secondary spring, that alone should be able to wheelie but if u want even better acceleration just get the stage one kit. i got it and i loved it. but from there i got it ported and head the head milled and put in a wiseco, that made jsut as big of a difference that the pipe did.

 

ur gonna wanna a pipe and a clutch spring to match just read this whole thread

 

i was wonderin what this RCR stage 1 kit is i've heard it is the best bang for the buck where can i find one of these and how much do they usually cost. also will it allow me to pull my front end off the ground.

 

http://rittercycle.com/polaris.htm


Get his stage one. Great kit, great service!

 

You said you wanted a f.m.f. Then go to the one stop place and call Dennis

 

Go with the RCR stage one kit.