If your tired of pressing the yellow overide button when you need some extra power in reverse gear,here's what I did after putting my hpd clutch kit in my quad I always having to have to press the overide button just to go in reverse (called HPD said it was normal)
,anyways this is how you do it, there's a plug under your hood it has
three wires that have white plactic tips that plug in to a plug that has four wires what you wana do is un plug one of the three wires with the white tips which is the yellow and red. There is only one plug that has white tips and the three wire colors are black,gray and orange,and the yellow and red which you will have to unplug,cover the exposed to tip with some type of rubber vacum plug or electrical tape..



Later to all the cool people

 

So did this workout for everyone ???????? Hit me up let me know

 

ON my 4x4 s all I had to do was unplug the black wire still have to push the button for 4x4 in reverse but not to back up.Mine are clutched too.

 

Does your Reverse light stay on now even when in forward?

 

reverse light does not stay on