K&N Part # for Predator 500

Reply Subscribe

Thread Tools

Search this Thread

Dec 28, 2002 | 07:16 AM

#11

modquad

Elite Pro Rider

Joined: May 2001

Posts: 5,309

Likes: 0

K&N Part # for Predator 500

Tried a twist on the other bike for a while....went back to the HPD billet thumb unit. Personaly preference.

Ken

Dec 28, 2002 | 09:19 AM

#12

truckracer

Pro Rider

Joined: Dec 2001

Posts: 585

Likes: 0

K&N Part # for Predator 500

There's wiring harness going into the thumb throttle housing on the Predator. Anyone know what its for?

Dec 28, 2002 | 06:26 PM

#13

badazzpred

Pro Rider

Joined: Dec 2002

Posts: 592

Likes: 0

K&N Part # for Predator 500

its for the override switch etc electronic throttle control its so when your throttle gets stuck it automaticly shuts off......... also has anyone had problems with start up linking to the override like when you start/choke you should be able to do that without even touching the throttle correct being brand new looking for any help on this one is there an adjustment inside the throttle housing?/

Dec 12, 2003 | 12:14 PM

#14

truckracer

Pro Rider

Joined: Dec 2001

Posts: 585

Likes: 0

K&N Part # for Predator 500

Quote:

Originally posted by: motoracer51
I removed the stock Predator air filter and brought the thing down to the nearest auto parts store. As I browsed throught the K&N Filter catalog, I happened to match a K&N to the stock filter using their (K&N) dimensions. The part number for anybody interested is 33-2003. It goes on a older Audi. I think it was to a 78-82 Audi 6000 or something. The dimensions matched up perfectly, I just didn't take the time to write down the exact car it is too. To those that have the bike, I've been looking at the airbox/air inlet. It is VERY RESTICTIVE. You have an approx. 2 liter airbox being fed by a 1" diameter intake. Maybee adding some circular filtered vents/and or increasing the airbox intake tube should help. I'll let you know the results.

Anyone ever try this part #33-2003 ?