425 Magnum intermitent problem
#11
425 Magnum intermitent problem
Found this and my problem is solved...thanks
I have a 95 425 magnum and your problem sounds like my old problem. You stated before that your limiter switch was maybe bad, I thought mine was the same problem until I clipped the green wire from the reverse overide button and it fixed all my problems. The mechanic at polaris said sometimes it will mess up and cause different problems.I am sorry it took me so long to tell you before you took your motor apart. Hope it works.
I have a 95 425 magnum and your problem sounds like my old problem. You stated before that your limiter switch was maybe bad, I thought mine was the same problem until I clipped the green wire from the reverse overide button and it fixed all my problems. The mechanic at polaris said sometimes it will mess up and cause different problems.I am sorry it took me so long to tell you before you took your motor apart. Hope it works.
#12
#14
#15
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
#17
#18
#19
#20
425 Magnum intermitent problem
52.99 seems like alot for that part. I think it is the 350 one. It seems like my four wheel drive has stopped working . I think I might have a wire wrong in my wiring block. what should I check to get the four wheel drive working. It was working before I started screwing with the rev limiter